 |
 1 4 Screw Lock Binding D Ring Steel with heavy nickel coating $2.76 Time Remaining: 15d 8h 47m Buy It Now for only: $2.76 |
 MAX TC99106 Screw lock Metal Cutter S MADE IN KOREA $2.99 Time Remaining: 20d 13h 27m Buy It Now for only: $2.99 |
 MAX TC99100 Screw lock Cutter Large MADE IN KOREA $5.99 Time Remaining: 20d 13h 26m Buy It Now for only: $5.99 |
Screw Lock
Several Tips to Replace a Deadbolt Door Lock
Deadbolt door lock is widely used for home security system today. It is one of the best devices you can use to secure your door since it is able to provide higher protection than the regular deadbolt lock. If you want to replace your old deadbolt lock with the new one, there are some procedures you have to follow. Here are some steps to replace the door lock for you.
Firstly, you need to prepare the tools you will need to help you do your task. The tools include the Phillips screwdriver, flat tip screw driver, file, ¾ inch wood chisel, and hammer.
Secondly, purchase the right deadbolt door lock. Since there are a lot of types available on the market, it will be better for you to go for the same brand and the same model as your old deadbolt lock. It will make your task easier since you don't have to redrill your door for new hole to fit your new lock. It will be able to fix to the existing hole in your door. Another important thing you need to do before buying this type of door lock is to make sure whether your door is left-handed or right-handed. Also, note the depth of the door to make sure that your new deadbolt door lock will fit the door for proper work.
Thirdly, remove your old door lock by removing the screws which are securing it by using the screwdriver. Most models of deadbolt lock have six screws. While removing your old lock, note how it is assembled.
Fourthly, test the assembly of your new deadbolt lock. Make sure that your new lock can fit into knob hole as well as the latch area in your door. If it cannot fit into knob hole, you should increase it by using the file. In addition, you can increase the lock if latch hole is too small. Then, make sure that it is level with the door edge. If not, you can use the wood chisel to fix it. Also, ensure that the two sides of your lock have been properly aligned for proper work. However, different models may need different steps. You can see it in the instructions.
Fifthly, secure your deadbolt lock. By using the screws, tighten those two sides. After you have assembled the new one, make sure that it is able to work properly by testing the key either from the inside or outside.
About the Author
Nowadays, the demand to the home security is increasing. For more protection, you can also use finger print door lock. Only those whose fingerprints stored in the system can access the door. Instead, you can also consider combination door lock.
I have a doorknob with a lock, and no screws, and am locked out. Any ideas how to remove the dooknob/lock?
My daughter locked her bedroom door, and closed it. We just moved in and the owners didnt leave us a key for this door. There are no screws on the doorknob and I cant get in through the window. Any ideas how to remove the lock?
There should be a small hole in the center of the knob. There are two different knobs. One, you just have to push a wire coat hanger into the hole and it will pop the lock open. Two, you have to find a small enough flat head screwdriver that will fit in the hole and turn it and it will unlock. Check over the door casing above all the locking doors in the house. Most people set them up there for easy access. Good luck...
Pinion removal using common tools